On April 30th, 2018, Microsoft released the new version of Windows 10, known as April 2018 Update. Plenty of s have installed the update already, either because it became available for their computer, or by ing it manually from Microsoft’s website. As with any update, April 2018 Update may create some problems. Thus, we will explore all the available solutions for the most common update problems.
Unblock any international website, browse anonymously, and movies and Mp3 with complete safety with CyberGhost, just for $2.75 per month:
For detailed instructions on how to install April 2018 Update, visit our guide.
Repair Windows before the update 221t42
If we haven’t updated our Windows for a long time, we might face some problems during the installation of April 2018 Update.
Therefore, it is advised to do a system repair before installation.
We will have to use the command line, but the procedure is simple and straightforward.
- Press Windows key + R.
- Type “msconfig” and press OK.
- On the Boot tab, check the “Safe boot” box.
- Restart your computer and wait until it boots into safe mode.
- Type “cmd” on search, right-click on it, and choose “Run as .”
- Type “sfc /scannow” and press Enter.
- Wait until the scan ends.
- Follow steps 1 to 3 again to uncheck “Safe boot.”
- Reboot.
Furthermore, you should always create a system backup before an update.
Problems during the installation 4171c
Besides the repair, we still might face issues during the installation of April 2018 Update. The next steps will help us overcome most update problems, with either Windows Updates or Media Creation Tool.
Errors ing the updates 3m203h
Sometimes, the system is not able to communicate with Microsoft’s servers; thus, we can’t install the new update.
The error codes for that kind of problems are the following:
- 0x800F0922
- 0xc1900104
- 0x80246007
How to solve
The most common reason for this problem is the use of a VPN service.
If we use any VPN service, we need to deactivate it and try again to install the update.
In a most unusual scenario, it is possible that an app occupies the system reserved space that the updates need to use.
In such a case, we can deactivate the antivirus program we use, which is the major suspect for this kind of problem. If we still can’t update, the next step is to use a third-party tool to expand the system reserved partition to at least 500MB.
If everything else fails, we can always try the Media Creation Tool route.
Unexpected error during 221mc
- 0x80190001
- 0x80070070 – 0x50011
- 0x80070070 – 0x50012
- 0x80070070 – 0x60000
- 0x80070008
On the other hand, if you see the above error code, then there was an unexpected error during the .
How to solve
To solve it, you’ll have to clean the temporary files and free some space on your drive. You can do this with the Disk Cleanup tool.
- Press the Windows key + R.
- Type “cleanmgr” and press OK.
- Select the C: drive.
- Click on “Clean up system files” and choose C: drive once again.
- Select the files you want to delete. Usually, you can clean the Recycle Bin, Temporary files, Temporary internet files, System error memory dump, Temporary Windows installation files, etc.
- Click OK and choose Delete files to proceed.
- Once you finish, repeat the update.
Windows Update doesn’t finish the installation 38713y
Sometimes we might get an error when we try to install April 2018 Update through Windows Update. Usually, the error code is the following:
- 0x80245006
No matter the error, the first thing we can do is run Windows Update Troubleshooter.
- First, we open Settings.
- Click on Update & Security.
- Select Troubleshoot and run the troubleshooter for Windows Update.
- Click on Apply and fix to resolve any issue.
- Restart your computer and try to install the update again.
If you still have a problem with April 2018 Update, even after the troubleshooting, you can try to install the update through Media Creation Tool.
Missing or corrupted files 322m67
During the or installation of April 2018 Update, we get an error saying that some files are missing or they are corrupted.
The relevant error code is the following:
- 0x80073712
- 0x80245006
How to solve
We can solve this issue with a disk cleanup, as described above. Once we finish, we can try to install the update once more.
If the installation fails again, we use the Media Creation Tool and create a bootable USB for a clean install.
Media Creation Tool stuck on ing the updates 362y3a
However, the tool may face problems ing some update, and it might get stuck.
If that happens, usually Media Creation Tool gets stuck at the end of the and right before the installation begins, without any error code.
How to solve
The easy way to fix this is to disconnect your computer from the internet when the reaches 100%, turning off the Wi-Fi adapter or plugging off the Ethernet cable.
The tool will stop searching for s, and it will proceed with the installation process.
After the installation, make sure to check for updates with Windows Updates, to install anything that might be missing.
Media Creation Tool errors 463l42
Most errors with Media Creation Tool are related to a Windows process called DynamicUpdate.
If you restart the process, the will start over, but it will be stuck once again.
How to solve
Press Windows key + E to open the explorer.
Type the following on the address bar and hit Enter:
C:\$Windows.~WS\Sources\Windows\sources
Run the Setupprep.exe to start the update again.
0x80070490 - 0x20003
If you encounter this error, use the cleanup process we mention above, and delete all the temporary files.
Then, disconnect all your peripherals and perform the repair you’ll find at the beginning of this guide.
Try to upgrade again with a bootable USB. You can always backup your system and perform a clean install of Windows.
Bootable USB errors 6o151e
If we use a bootable USB to install April 2018 Update on Windows, we may deal with a couple of known issues.
The culprits this time may be some corrupted system files on the installation media.
How to solve
At first, we need to write the ISO once again to our USB, because something might have gone wrong the first time. Alternatively, we can use a different flash drive to make sure the first one wasn’t damaged.
0x8007025D - 0x2000C
- If the problem remains, or if we get the above error code, then the ISO might be corrupted. We have to re- it with Media Creation Tool.
Minimum requirements error 4r376p
Most of the devices - if not all - that are compatible with Windows 10 should run well with April 2018 Update.
After the Anniversary Update, Microsoft changed the minimum system requirements. For April 2018 Update, though, the minimum requirements haven't changed. You can see them below:
On older devices, you might get the following error codes:
- 0xC1900200 – 0x20008
- 0xC1900202 – 0x20008
How to solve
The only solution to these problems is to consider buying a newer system.
As we mentioned, if you already had Windows 10 and you’re just updating to the newest version, it is highly unlikely that you’ll run into this problem.
However, there might be some low-end tablets or laptops that won’t be able to run April 2018 Update. The problem might be solved by installing more RAM in case of laptops.
Driver issues during the installation 17816
Any error that starts with 0xC1900101 has to do with driver incompatibilities.
The following errors are some of the most known ones:
- 0xC1900101 - 0x20004
- 0xC1900101 - 0x2000c
- 0xC1900101 - 0x20017
- 0xC1900101 - 0x30018
- 0xC1900101 - 0x3000D
- 0xC1900101 - 0x4000D
- 0xC1900101 - 0x40017
- 0x80090011
How to solve
The first thing you want to do is fix the problematic driver.
- Right-click on Start and choose Device Manager.
- Right-click on the problematic driver, marked with a yellow warning sign.
- Choose to uninstall the device and follow the directions.
at the beginning of this guide.
As an alternative, we can try to use Media Creation Tool.
Compatibility issues 2k4869
- 0x800F0923
- 0x80070490 - 0x20007
This error code relates to a compatibility issue with a driver or program.
Graphics cards cause the problem in the driver cases, whereas older programs are the culprits on the software side.
How to solve
It may be pretty hard to locate the root of this problem, especially if our computer runs smoothly without the April 2018 Update.
The fastest way to skip the error is to use Media Creation Tool.
During the update, the tool will help us find the cause, and it will suggest a solution.
We can then install the newest drivers or uninstall the driver completely. To do so, follow the steps we described in the previous error.
If the problem is caused by a program, we have to uninstall it. After the update, we can try to install it again.
0xC1900208 – 0x4000C
This code refers to an incompatible program as well. Windows will inform us on which app causes the incompatibility, so we can quickly remove it and retry.
Error 0x80070522 1z2s65
If we get the error above, it means we are trying to install the update without istration privileges.
All we have to do is sign out and sign back in with an .
I accidentally restarted my computer during installation 3f4152
It can happen to anyone, especially with an unexpected power outage for desktop PCs without a UPS.
If we restart the machine during installation, we’ll get the error code:
- 0x80200056
How to solve
The only thing you’ll need to do is restart the update. This time, be more careful.
Problems finishing the installation 1y2z2
On some s, the update can’t finish, and the installation program restores the previous Windows version.
Below you’ll find the most common error messages for such a situation:
- Error: Failure configuring Windows Updates. Reverting changes.
- Error: We couldn't complete the updates. Undoing changes. Don't turn off your computer.
How to solve
Unfortunately, there is no perfect solution for these problems, since Windows itself doesn’t report the cause of the issue.
If you have an old laptop, you can try to power off the device, remove the battery for a few seconds, put it back in and retry to install the update.
For more information though, you can access your update history.
- Open Settings.
- Go to Update and Security.
- Click to view the update history.
- Locate the update that failed to install and note the error code.
- Search the code on Google, or leave a comment below so we can help you further.
Black screen during installation 6s6z72
Usually, a bad driver or a faulty update can be responsible for the black screen during the installation.
How to solve
- First, leave your computer open for a few hours, in case the installation proceeds normally.
- After 2 to 6 hours, and if the black screen insists, turn off the device.
- Unplug all your peripherals, except for the keyboard, mouse, and monitor.
- Turn on the computer and check if the update completed successfully.
If it failed, use Media Creation Tool to make a bootable USB and try again.
Problems after the installation 2jz58
Cool, we finished the update or clean install of April 2018 Update. We can finally use our computer as usual. Right?
The installation may have gone smooth, or it may have had problems. However, once we finish, we have other things to worry about.
Below you will find the most common update problems post installation and how to solve them.
Windows activation fails w2wz
Some s have faced an activation problem after the installation. In this case, Windows reports that the activation code is not correct or you may see this error code on Settings:
- 0x803F7001
How to solve
There is nothing to worry about, your license is safe, and you can activate your Windows copy with the Activation Troubleshooter.
You will find a step-by-step guide on how to do that here.
April 2018 Update t6556
The problems in this section are known issues for April 2018 Update. In case you notice any other problem, feel free to leave a comment below.
Microphone won't record any sound 6k3o72
On version 1803, some s report that their microphone won't record any audio, although Windows seems to recognize it.
How to solve
- Go to Start > Settings.
- Click on Privacy > Microphone.
- Turn on the switch to allow apps to access your microphone.
- Then, enable access to the apps you want from the section below.
The camera doesn't work 2x234l
The same issue can occur with the camera. All we have to do is follow the same steps.
How to solve
- Go to Start > Settings.
- Click on Privacy > Camera.
- Make sure that the camera access for this device is on. If it's not, click on "Change" and enable it. Then, turn on the switch to allow apps to access your camera.
- Last but not least, enable access to each app separately from the section below.
Alt+Tab shortcut is slow while gaming 635e3g
This issue is widespread among s, who report that while gaming, the Alt+Tab shortcut takes to long to work.
The problem is the new feature Focus Assist, which is supposed to help us stay focused, without the annoying notifications.
The solution is rather simple.
How to solve
Open Settings and navigate to System > Focus Assist.
On the Automatic Rules, turn of the last switch "When I'm playing a game."
There's a new partition on my disk p311s
If you happened to notice a new partition on your drive, don't fret - it's because of the April 2018 Update.
This new disk is a Windows recovery partition, and you should leave it as is. The only problem is that it shouldn't be visible.
Microsoft has acknowledged the issue and will probably release a fix for it.
Nvidia is gone cr5x
If you have an Nvidia card and the Nvidia Settings is missing after the update, you should reinstall the latest drivers of your graphics card.
Windows Explorer crashes 5923o
s report that Windows explorer randomly crashes after the latest April 2018 Update.
Microsoft hasn't recognized the problem as a bug yet, but it is caused by the new Timeline feature. Deactivating the Timeline seems to solve the problem.
How to solve
- We navigate to Settings > Privacy > Activity History.
- Uncheck the second box "Let Windows sync my activities from this PC to the cloud."
- Close the Settings and reopen the .
- Navigate to the same tab and clear the activity history at the bottom of the screen.
I can't connect to any WiFi 3r4f5h
If you have difficulties while trying to connect to a wireless network, you will have to run the troubleshooter.
How to solve
- Open Settings > Network & Internet > Status.
- Click on the Network troubleshooter.
- Follow the steps described in the tool.
If the problem persists, then you can try to restart your network adapter.
- Open once again the Settings > Network & Internet > Status.
- Click on Network Reset.
- Press "Reset now."
Problems with Dell laptops 3b465c
As of May 3rd, Microsoft announced that there is a problem with certain Dell laptops and the April 2018 Update.
In fact, the update has been blocked for the devices listed below, due to incompatibility issues.
- Alienware 13 R3
- Alienware 15 R3
- Alienware 15 R4
- Alienware 17 R4
- Alienware 17 R5
If you own one of these laptops, you shouldn't try to install the update manually, because you will eventually need to roll back to Fall Creators Update.
The April 2018 Update changed some of my settings 4b1u1y
Usually, when we update to a newer version, our settings remain the same. However, in the April 2018 Update, some of the settings were reset to the default values.
We list the settings below:
Fast startup: If you had disabled the Fast Startup, it might have turned back on automatically.
System protection: The system restore is off by default, but some s may have enabled it. If you are one of them, you'll find that it was turned off, and you'll have to re-enable it.
Problems with previous Windows updates 633m3a
The issues below were present at previous Windows updates, such as the Fall Creators Update. Although they seem to have been fixed, we will list them for reference.
Missing OneDrive Files On-Demand m228
OneDrive has a new feature, known as Files On-Demand.
With this feature, we can access our files on the cloud from Windows Explorer, without the need to them on our hard drive.
However, many s report that they can't find the new feature on their OneDrive. It is now a bug though since Files On-Demand isn't a feature of Fall Creators Update.
On the contrary, it comes with the new version of OneDrive, and it seems that Microsoft will push this new version to our machines in waves.
- How to solve
- If you want the new OneDrive here and now, you'll have to follow the steps below:
- it from here.
- Open the setup and follow the instructions.
- Perform a restart.
- Open OneDrive and sign in.
- Right-click on OneDrive in the notification area and select Settings.
- Go to the Settings tab and select “Save space and files as you use them.”
That will turn on the Files On-Demand feature.
Microsoft Edge issues 1c1q3g
Edge is not the most popular browsing program, but it’s becoming better and better with every update.
This time though, some s are facing freezing problems with Fall Creators Update, where Edge becomes sluggish and unresponsive.
How to solve the freezing issues
Microsoft hasn’t acknowledged the problem yet, but you can use the built-in troubleshooter and try to repair the app.
- Open Settings and go to Apps > Apps & Features.
- Select Microsoft Edge and click on Advanced.
- Press the Repair button.
If you still have the same problem, repeat the steps and choose Reset instead of Repair.
Emoji missing 6cn5p
Another new feature on Fall Creators Update is the native emoji with Windows key + “.” or “;”. Not on all of us though, since there are once again s that can’t locate the new feature.
How to solve
If you’re one of them, then you probably don’t have a US keyboard installed. Unfortunately, the emoji is only for this language.
You can always add the keyboard though:
- Open Settings and navigate to Time & Language.
- Go to Region & Language.
- Select Add a language.
- Find the US English and add it.
You don’t need to make it your primary language. As long as you have the language selected, you will be able to use the above shortcuts.
In case you already had English but different than the US:
- Click on the language and choose Options.
- Select to add a keyboard and choose the US.
6r6g1k
Annoying touch keyboard on every boot 48332k
If you see a touch keyboard every time you boot your desktop computer, then you are probably annoyed.
Microsoft hasn’t acknowledged the issue as a bug, but there are some workarounds.
Solution #1
- Right-click on the taskbar and open the Task Manager.
- Click on More details.
- Find the Touch Keyboard and Handwriting process and end the task.
With these steps, it won’t open again on startup, but the problem will return if you start the touch keyboard manually.
Solution #2
You can always disable the touch keyboard if you never use it.
- Search for Services and open it.
- Locate the Touch Keyboard and Handwriting Service and double-click on it.
- Click on the drop-down Startup type menu and choose Disable.
- Choose to stop the service and hit “Apply.”
- Restart your computer.
If there’s ever an update that fixes the problem, you can revert the changes.
Start menu issues 1x17
It seems that the Start menu has some problems after the update. s reported that icons and live tiles are missing, others see a weird “ms-resource” entry, while on some s the Start menu doesn’t work at all.
How to solve
First, try to reinstall the missing apps from the store. Alternatively, you can reinstall all the built-in Windows apps from PowerShell.
- Type “Powershell” on search, right-click on it and run it as .
- Copy and paste the following:
Get-AppXPackage | Foreach {Add-AppxPackage -DisableDevelopmentMode - "$($_.InstallLocation)\AppXManifest.xml"} - Hit Enter.
Did you face any update problems with April 2018 Update? 3t3h1k
Although an update is supposed to improve our experience with an operating system, sometimes it may create more problems than it solves.
If you encountered any of the issues above or if you need more help installing the new April 2018 Update, feel free to leave a comment below.
- it from here.
PCsteps 4x1e3d
Do you want to PCsteps, so we can post high quality articles throughout the week?
You can like our Newegg.
If you prefer your purchases from China, we are d with the largest international e-shops:
